Key Features of Leica Disto D210 Laser Measuring Meter
The new wider 3-line display makes it possible to read off individual and final readings from several measurements at a glance, e.g. area and volume calculations – and thanks to automatic display illumination, even in the dark. The Leica Disto D210 Distance Meter is very simple to use yet achieves a measuring accuracy of ± 1.0 mm. Adding and subtracting as well as area and volume calculations, make for fast and reliable measuring. The last ten results are saved and can be accessed as required.
ISO Standard 16331-1 – The standard for laser distance meters
The range and accuracy of laser distance meters depend on light conditions and reflectivity of the measuring target. For Leica Geosystems it is important that the instruments not only perform under perfect laboratory conditions, but above all under the kind of everyday working conditions encountered on construction sites. This is why, working together with external experts, the company have developed a standard by which laser distance meters can be tested and compared with each other.
Precision at the touch of a button
For everything you need to be accurate:
The Leica DISTO™ D210 measures with an accuracy of ± 1.0 mm.
Small and handy
Thanks to its ergonomic and compact design with soft grip, the Leica DISTO™ D210 sits securely in your hand, is lightweight and fits into any pocket.
Whether measuring out of corners, slots or from edges, with this end-piece you are prepared for all measuring situations. The instrument detects the end-piece automatically, which helps you avoid expensive measuring errors.
Easy to read display
The results are shown on three lines. The display illumination means they can be clearly read, even in the dark.
Leica Disto D210 Features Minimum / maximum measurement function
The maximum measurement is very helpful, e.g. for finding out the room diagonal. The minimum measurement can be used to measure at right angles to a wall.
Leica Disto D210 Features Area and volume measurement functions
With only two or three measurements, you can quickly and precisely calculate the area of a ceiling, floor or wall, or the volume of a room. No need to note down the individual values! The result is calculated automatically and shown on the display.
Leica Disto D210 Features Painter function
With this function you can determine e.g. the total wall area of a room without having to note down any intermediate results. Simply measure the lengths of the walls, which you can add or subtract as required. Finally measure the room height, which is then automatically multiplied by the previously calculated value.
Leica Disto D210 Features Stake-out function
One or two different distances (a and b) can be entered into the device and then used to subtract from defined measured lengths. The display always shows the current stake-out distance and a direction arrow. At a distance of 0.1 m to the next stake-out point, an acoustic signal sounds.
Leica Disto D2 Features Pythagoras functions
Using the tripod, you can measure distances indirectly, horizontally and vertically. The Leica DISTO™ calculates the result automatically for you from three measurements. Functions such as automatic minimum and maximum measurements help you to measure the right point.
Partial heights, e.g. balcony or window heights, are determined by Pythagoras.