View Product Details →

Buy Online →

The Bosch GSL 2 can scan the entire floor within minutes and will never miss an uneven spot. A target plate and RC 2 remote control with a working range of 60 feet allow users to remain close to the uneven spots for marking and examination, rather than having to stay near the tool to operate.

Flooring inspectors, screed workers, tillers and various trades people who lay out flooring can determine even surfaces, raised bumps or recesses in the floor with the GSL 2 at a more efficient rate than spirit levels, optical levels, and rotary and line lasers. The GSL 2 can be used with the four included AA 1.5V alkaline batteries or with the Bosch 12V Li-Ion battery pack (not included) for up to 15 hours of operating time, adding the convenience of a dual power source to the user experience.

With accuracy of 1/8 inch at 30 feet, the GSL 2 offers line visibility of 30 feet, increasing to 60 feet when used with the target plate. The tool self-levels in five seconds within a leveling range of ± 4 degrees.

Using the GSL 2 to check floor level and flatness is a simple and fast three-step process:

Step One:

• Place the GSL 2 at the floor’s benchmark, the level at which the entire floor should match
• Turn on the laser using the sliding on-off switch located on the side of the tool
• Adjust the height of the GSL 2 until its two laser lines come together as one on the floor
• Set the laser using the knob

Step Two:

• Use the RC 2 remote control to scan the floor surface, making sure to face the GSL 2 as it isoperating. The remote control has 3 different speeds and has the ability to go backto the desired spot both in clockwise & anti clockwise direction.
• Begin observing the lines on the floor surface

Step Three:

• Watch as the lines separate at points along the floor, indicating a bump or recess
• Use the provided easy-to-read target plate to determine the height of deviation at the uneven spot
• Mark the uneven spot where necessary for re-work

The Bosch GSL 2 is available beginning July 2012 through authorized Bosch distributors nationwide. The GSL 2 kit contains four AA batteries for the GSL 2, an RC 2 remote control and three AAA batteries, a target plate, laser goggles, user manual and an L-Boxx 3 with plastic inlays.

View Product Details →

Equipped with a five point laser and a cross line laser in one tool, the GCL 25 saves time, money and space by removing the need for users to purchase and set up two lasers on the jobsite. The tool’s simple one-button operation can be used to quickly switch between its multiple self-leveling modes and its slope mode, making it a laser that increases productivity on the job-site.

The tool’s five laser points are visible up to 100 feet and offer accuracy of ¼ inch for points and 1/8 inch for cross-line, with laser line visibility of up to 33 feet. A keypad can be used for simple line and point selection including self-leveling, plumb up and down, horizontal leveling, alignment, right angle setting and laser cross-line. The cross lines add value to a typical point laser as it is able to provide alignment applications such as measuring off the level line.

In self-leveling mode, the GCL 25 offers a leveling range of 4 degrees and alerts users with flashing lines when there is an out-of-level measure of greater than 4 degrees. An on-off sliding button provides a pendulum lock function for protection during transport, while sturdy product design keeps the tool fully protected against dust and splash water.

Innovative features make the GCL 25 ideal for a multitude of leveling, squaring, transfer and plumbing applications such as:

• Transferring points to the ceiling or lighting installations using plumb points
• Leveling wall sockets, light switches and chair rails, and most other leveling applications
• Squaring for room partitions or walls using the five-point mode
• Laying out frame tracks for both metal and wood framing applications

The Bosch GCL 25 is available July 1st through authorized Bosch distributors nationwide. Included with the laser are batteries and a protective pouch. Optional accessories are a magnetic target, WM1 mount, DLA001 Laser glasses and BP 350 Telescoping Pole System.