Kryptton DGPS - VP Civil Technologies Pvt. Ltd. https://www.vpcivil.co.in/tag/kryptton-dgps/ We are leading provider of precision measuring instruments. Tue, 10 Mar 2020 04:43:13 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Kryptton GNSS Receiver https://www.vpcivil.co.in/kryptton-gnss-receiver/ Sat, 22 Feb 2020 15:09:28 +0000 https://www.vpcivil.co.in/?p=12671
Kryptton GNSS Receiver

Kryptton GNSS Receiver empowered by a high precision inertial measurement unit (IMU) on Ultimate version, Kryptton GNSS receiver is a new generation of tilt survey GNSS receiver. This kind of calibration-free tilt compensation is immune to magnetic disturbances. Kryptton GNSS receiver gives a surveyor unprecedented flexibility and efficiency – holding the survey pole upright is no longer necessary. With an internal high-performance multi-constellation and multi-frequency GNSS board, the Kryptton GNSS Receiver can provide high accuracy and stable signal detection.

  • Supports multiple constellations & frequencies: GPS, GLONASS, BeiDou, Galileo, SBAS, QZSS, GAGAN
  • Supports 576 channels
  • 410-470MHz UHF radio, 4G network, Wi-Fi, Bluetooth, NFC
  • Tilt compensation without calibration, immune to magnetic disturbances
  • 16GB/8GB internal storage
  • Up to 16 hours working in 4G/3G/2G network and Rover radio mode
  • IP67-rated dust-& waterproof enclosure, for reliability in harsh environmental conditions

Shipping Worldwide – Contact Us for Best Price

Get Quote
1 Step 1
Get Instant Quote
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

Kryptton Differential GPS GNSS Receiver

Kryptton GNSS Receiver’s built-in high-performance antenna can speed up the time to first fix (TTFF) and improve anti-jamming performance. With a Nano-SIM card inserted in Kryptton, it can access Internet, transmit and receive correction data through 4G/WiFi network. The built-in UHF radio module supports long distance communication. The built-in large capacity battery is detachable and can display power level. Two batteries support up to 16 hours of fieldwork in 4G/3G/2G network and Rover radio mode. Kryptton GNSS can be easily configured with 1.54 inch interactive screen on Ultimate and Advanced versions. The rugged housing protects the equipment from harsh environments.

The Kryptton TC20 Controller is a rugged smart phone with design of 4.3” touch screen and an alphanumerical keypad. Equipped with powerful processor, it is perfect to adapt with Kryptton Survey software. With professional IP67 rating, it is robust and reliable for harsh operating conditions.

Kryptton GNSS Receiver Technical Specifications:

Signal Tracking
GNSS GPS L1, L2, L5
GLONASS L1, L2
BeiDou B1, B2, B3
GALILEO E1, E5a, E5b
QZSS L1, L2, L5
SBAS (EGNOS, WAAS, MSAS, GAGAN) L1C/A
Channels 576

Positioning
Single Point Positioning Accuracy (RMS)
Horizontal 1.5m
Vertical 3.0m
DGPS Positioning Accuracy (RMS)
Horizontal 0.4m
Vertical 0.8m
SBAS Differential Positioning Accuracy (RMS)
Horizontal 0.6m
Vertical 1.2m
High-Precision Static (RMS)
Horizontal 3 mm + 0.1 ppm
Vertical 3.5 mm + 0.4 ppm
Static & Fast Static (RMS)
Horizontal 3 mm + 0.5 ppm
Vertical 5 mm + 0.5 ppm
Real Time Kinematic (RMS)
Horizontal 8 mm + 1 ppm
Vertical 15 mm + 1 ppm
Post Processed Kinematic (RMS)
Horizontal 8 mm + 1 ppm
Vertical 15 mm + 1 ppm
Network Real Time Kinematic (RMS)
Horizontal 8 mm + 0.5 ppm
Vertical 15 mm + 0.5 ppm
Observation Accuracy (zenith direction)
C/A Code 15cm
P Code 20cm
Carrier Phase 1mm
Time To First Fix (TTFF)
Cold Start <35s
Warm Start <10s
Re-acquisition <1s
Tilt Compensation Accuracy (within 30° ) ≤2cm
*Available in Ultimate Version
Timing Accuracy (RMS) 20ns
Velocity Accuracy (RMS) 0.03m/s
Initialization (Typical) <10s
Initialization Reliability >99.9%

System & Data
Operating System Linux
Storage 8GB & 16GB internal
Data Format CMR, CMR+, RTCM 2.X/3.X
Data output RINEX, NMEA-0183, Binary
Data update rate 20Hz

Electrical
Input Voltage 9~28V DC
Power Consumption (Typical)
Network or Radio receive mode ≈ 5W
Radio transmit mode (0.5W) ≈ 8W
Radiotransmit mode (1W) ≈ 9W
Radiotransmit mode (2W) ≈ 11W
Lithium Battery 7.4V 6400mAh x2*
*Kryptton GNSS uses one battery at a time, the other is a substitute. Each battery lasts up to 8 hours when Kryptton GNSS works in 4G/3G/2G network and Rover radio mode. Two batteries add up to 16 hours of continuous use.

Communication
Cellular 4G LTE/TD-SCDMA/WCDMA/GPRS/GSM
Network protocols Ntrip Client,Ntrip Server, Caster Service
WiFi 802.11b/g
Bluetooth 4.1
Internal Radio
RF transmit power 0.5W/1W/2W
Frequency 410MHz – 470MHz
Operating mode Half-duplex
Channel spacing 12.5KHz / 25KHz
Modulation type GMSK, 4FSK
Air baud rate 4800 / 9600 / 19200bps
Distance (Typical) >5km
Radio protocols TrimTalk450, TrimMark 3, South, Transparent, Satel
Wired communication
USB OTG USB 2.0 x1
Serial ports RS232 x1
COM baud rate up to 921600bps

Physical
Display 1.54’’ OLED
*Available in Advance & Ultimate Version.
Dimension 157x157x103mm
Weight ≈ 1.2kg (without battery)
≈ 1.4kg (with a battery)
Operating Temperature -40℃ ~ +75℃
Storage Temperature -55℃ ~ +85℃
Relative Humidity 100% not condensed
Dust & Water Proof IP67
Pole drop onto concrete 2m

Download Kryptton GNSS Receiver Catalog

Download Kryptton GNSS Receiver Catalog
Get Quote Now

Kryptton GNSS Receiver – Built for the future

Withstanding vibration and 2m topple over, and unbeatable IP67 protection for dust and immersion in water, the Kryptton GNSS receivers are built to last, performing under extreme conditions. Equipped with the most advanced GNSS receiver technology, Kryptton GNSS supports GPS, GLONASS, Galileo, BeiDou, GAGAN and SBAS systems. Suitable for any application, the Kryptton GNSS Receiver additionally considers new GNSS constellations like BeiDou and Galileo today and is prepared for even more signals tomorrow.

Contact us for Kryptton GNSS Receiver Price..

Get Quote Now
]]>