Placom Digital Planimeter KP-21C

VP Civil Technologies Pvt. Ltd. — Wed, 21 Sep 2011 17:41:31 +0000

Koizuimi Placom Digital Planimeter KP-21C

Intelligent Planimeter KP-21C

The KP-21C is a new era of planimeter technology. Revolutionary and Enhanced Functions. PLOT-key tracking device with easy One-Touch action. Advanced features for exceptional cost performance to meet all of your present and future needs.

[vc_tabs interval=”0″ width=”1/1″ el_position=”first last”] [vc_tab title=”Description” tab_id=”description”]

You can measure 2D area, overall length, segmental length and coordinates.

Once you trace the outline of diagram, you can easily get the essential data of area, length, segmental length and coordinates data simultaneously. As a simple measureing device it’s fast and convenient.

Different X and Y scales can be entered.

KP-21C is capable of exchanging X and Y scales so that you can measure area and coordinates of any diagram.

Simple operation of complex measurements.

Accurately measure area, length, segmental length and coordinates.
The ability to upload data and transfer it to computers and remote sight computers.
Removable printer for recording results.

Data Out-Put

RS-232C cable (optional)
Provides easy connectivity to any computer.

A liquid crystal display

16 digit 2 line dot matrix type display for easy reading results.

Trace lens

For convenient curved line measurement, our Auto-Close function will measure any enclosed area. when the target of the trace lens approaches to within 0.54mm of its origin, KP-21C automatically closes the shape and calculates its area. Keep the PLOT-key pressed for a few seconds to insure that the pilot lamp illuminated your work area. It will switch to curved line mode and then when you press again it returns to straight line mode.

[/vc_tab][vc_tab title=”Specifications” tab_id=”specifications”]

Placom Digital Planimeter KP-21C Technical Specifications:

Measurement functions	area, length, segmental length and coordinates
Measurement	Metric : mm, cm, m, km Imperial: in, ft, yd, miles
Interface	Exclusive removable printer or RS-232C cable (optional)
Measuring range	10m (horizontal maxim) 380mm (vertical maxim)
Minimum measuring length	0.05mm
Accuracy	Within ± 0.1%
Power supply	Rechargeable NiCd battery (up to 15 hours of continuous use) A/C power supply (recharger)One can use the KP-21C while it’s recharging
Size / KP-21C	With printer : 430mm x 159mm x46mm With case : 368mm x 204mm x 65mm

[/vc_tab][vc_tab title=”Downloads” tab_id=”downloads”]

Brochure

Placom Digital Planimeter KP-21C

Manual

Placom KP-21C User Manual

[/vc_tab] [/vc_tabs]

Placom Digital Planimeter KP-90N Series

VP Civil Technologies Pvt. Ltd. — Wed, 21 Sep 2011 15:01:13 +0000

Placom Digital Planimeter KP-90N-Series with the most advanced functions and perfect reliability.

The most standard model of “Koizuimi Placom” N-Series has made the excitingly highest attainment in the history of Placom Digital Planimeter KP-90N ever made. Measuring capacity is remarkably enlarged. Measuring by 6-digit pulse count enables to measure 100 times larger accumulative area than ordinary planimeters. Easy calculations of Cumulative and Average Value Measurement.

Applications

Construction and civil engineering
Land developing planning
Machine designing
Datalanalysis in statistics
Architecture and interior designing
Forestry area
Ship designing
Medical research
Agriculture

Contact Us for Best Price

Get Quote

Description

Key Features of Placom KP-90N Digital Planimeter

Measurement by 6 digit pulse count

This N-Series can measure the area by pulse count of 6-digits. This method enables a larger cumulative measurement of area (Up to 10m²)

Maximum cumulative measurement value of 10m²

With the measurement by 6-digit pulse count, the N-Series Planimeter can measure a larger area by 100 times than ordinary Planimeter.

The conventional planimeter has a maximum cumulative area to measure only 0.1m². If measurement value shows over 0.1m2 when measuring, the display is to be reset to “O”.

This requires to register the numbers of how many times these re-settings are occurred.

With the New PLACOM N-Series, there is no need of these troublesome procedures.

Easy conversion function of unit and scale

Placom KP-90N can convert easily the measured area value into a new area value in a newly desired unit and with a newly desired scale value.

Placom KP-92N and KP-82N can convert the unit between in² and cm²

Hold memory function

In cumulative measurement, this Hold Memory function is effectively used. If an error occurs in measuring, press C/AC key. Then last measured value is appeared by pulse count. Since previous measured values before error are stored, there is no need to another measurements from the beginning.

Automatic shifting of unit to upper unit

When the measured area value overflows the displayed figures of 8 digits, the measured area value is calculated and displayed by an upper unit. When the overflows is occurred in the uppermost unit, km², acre, the measurement can be continued by pulse count display.

Average value measurement

In order to get better result of measurement, Mean value measurement is recommended. This measurement can be easily done on this N-Series.

Measurement of an area with different lateral and longitudinal Scale.

Auto-power-off function for energy saving

Technical Specs

Placom KP 90N Digital Map Measurer Technical Specifications:

Model Parameter	KP-90N	KP-92N	KP-80N	KP-82N
Type	Roller Type		Polar Type
Type	With Computing Function	Single Function	With Computing Function	Single Function
Display	Liquid Crystal, 8-digit Figures
Display	13 Symbols	6 Symbols	13 Symbols	6 Symbols
Symbol	Batt-E, SCALE Memo, Hold cm², m², km², in², ft², acre etc.	Batt-E Memo, Hold cm², in², etc.	Batt-E, SCALE Memo, Hold cm², m², km², in², ft², acre etc.	Batt-E Memo, Hold cm², in², etc.
Converting Function	Unit and Scale value	Unit(in², cm²)	Unit and Scale value	Unit(in², cm²)
Accumulated Measuring Value	Maximum 10m²(Scale 1:1)
Measuring Range	Maximum vertical width: 325mm Horizntal roller rotating length: 30m		Maximum, with the pole put outside the pattern: 300mm in diameter Maximum, with the pole put inside the pattern: 800mm in diameter
Accuracy	Within +/-0.2%(Within +/-2/1000pluses)
Power Supply	Built-in NiCd Battery(rechargeable through AC Adapter) AC Adapter 100-240V (Auto-power-off function is provided.)
Operating Duration	Approx. 30 hours of continuous operation
Battery Charging Time	Approx. 15 hours
Main Unit Weight	750g		780g
Accessories	Supplied AC Adapter and Plastic Case